1
FFrreenncchh DDoooorr BBoottttoomm MMoouunntt DDiissppeennssiinngg aanndd SSttoorraaggee GGuuiiddee
Additional Features
WINE RACK AND/OR UNDER SHELF STORAGE PAN
Important information to know about glass shelves and
covers:
Do not clean glass shelves or covers with warm water when they
are cold. Shelves and covers may break if exposed to sudden
temperature changes or impact, such as bumping. Tempered glass
is designed to shatter into many small, pebble-size pieces. This is
normal. Glass shelves and covers are heavy. Use both hands when
removing them to avoid dropping.
Under one shelf, there are brackets installed to the supports (one
bracket on each support). The wine rack or under-shelf storage
rests in these brackets.
To remove and replace the wine rack or pan:
1. Remove the wine rack/pan by lifting it up off the brackets.
Press the right-hand side of the rack inward until it is free of its
bracket. Lower the right-hand side slightly and disengage the
left-hand side from its bracket.
2. Replace the wine rack/pan by inserting the left-hand side into
its bracket. Press inward on the right-hand side until it will slide
past the bracket edge and set it into its bracket.
NOTE: Under shelf storage pan utilizes typically empty space
beneath the shelf to create a prep zone ideal for doughs,
desserts, casseroles, or marinating meats. The slide-out pan is
oven and dishwasher safe and easily transitions from fridge to
oven.
PULL-OUT PLATTER
To remove and replace the pull-out Platter:
NOTE: Refrigerator doors will need to be removed to remove
platter pocket. See the “Remove and Replace Refrigerator Doors”
section for more information.
1. Pull the pull-out platter to the fully open position or when it
stops.
2. Locate the pull-out platter retention clips on both sides. These
are in the side under the pull-out platter.
3. Push the clip up from the bottom with your finger.
4. After both clips have been disengaged, carefully remove the
pull-out platter toward the front of the refrigerator.
Humidiseal™™ CRISPER DRAWERS
These upgraded crisper drawers use a gasket seal to maintain the
ideal temperature and humidity levels to keep produce fresh longer.
These drawers also feature premium soft-close glides that provide
the best extension for easy access and maximum visibility to your
produce items.
To Next Page
Need help?
General
Weight and Dimensions
