19
Backside of Unit
Freezer Side of Unit
Door
1/4" side panel fitted up to
the cabinet trim (top view)
on Freezer side.
3/16"/.48
Spacers
#8-32 1/2"
Screw
1/4"/.64 Side Panel
1/4" side panel fitted up to
the cabinet trim (top view)
on Refrigerator side.
Backside of Unit
Refrigerator Side of Unit
1/2"/ 1.27 Spacers
on side of machine
compartment
(3/16"/.48 below the
machine compartment)
Door
#8-32 1/2"
Screw
1/4"/.64 Side Panel
INSTALLATION GUIDE – SIDE PANELS
Installing Side Panels
If using side panels with the Jenn-Air
®
Built-In Refrigerator,
they will need to be
1
⁄4-inch thick. Slide the panel into
position and secure with screws indicated by the shaded
area (FIG. 11a). A
3
⁄16-inch spacer is required between
the cabinet and side panel (FIG. 11b). A
1
⁄2-inch thick by
10
1
⁄4 -inch tall spacer is required if the side panel extends
up into the machine compartment area on the refrigerator
side (FIG. 11c).
FIG. 11a
FIG. 11c
Side Panel
(Dimensions Typ.)
82 13/16"
210.3
2 1/2"/6.35
24"/61
2 7/16"/6.19
1 3/8"/3.5
3/8"/.95
Toe Kick and Hinge Area
Rear
Front
FIG. 11b
To Next Page
Loading...
