Jenn-Air JS48PPDBDA - INSTALLATION GUIDE INSTALLING PANELS ON DISPENSER MODELS; Freezer Dispenser Panel Installation

15
INSTALLATION GUIDE – FRAMED MODEL PANELS
Backer Panel Thickness 1/4” (0.64 cm)
Spacer Panel Thickness 0.100” (0.25 cm)
If Raised Panel is Used Overall Front Panel
Thickness Not to Exceed 1-1/4” (3.18 cm)
NOTES:
1. Use counter sink screws for attaching the
backer panel to the front panel.
2. On 42" custom panels, watch location of
handle mounting due to under cut of front
panel.
3. For freezer dispenser front panels, remove
fountain trim and tape to the backside of
the backer panel. Note: recycle symbol
should be visible and located at the
bottom.
4. You may want to remove any additional
material on the backer panel when used in
conjunction with a front panel. Remove
1/32" on thickness and 1/2" wide of
material on the inside surface of the backer
panel. This will help ease assembly of the
panel assembly onto the door.
42” Wide Cabinet 48” Wide Cabinet
BACKER PANEL in cm in cm
(A) Grille Panel
W Width 40 1/4 102.24 46 1/4 117.48
H Height 8 3/4 22.23 8 3/4 22.23
(B) Freezer Dispenser Panel
W Width 15 1/16 38.26 17 5/16 43.97
W1 Width 2 5.08 2 5.08
W2 Width 14 1/2 36.83 14 1/2 36.83
H Height 69 1/8 175.58 69 1/8 175.58
H1 Height 34 1/16 86.52 34 1/16 86.52
H2 Height 48 1/8 122.24 48 1/8 122.24
(C) Freezer Non-Dispenser Panel
W Width 15 1/16 38.26 17 5/16 43.97
H Height 69 1/8 175.58 69 1/8 175.58
(D) Refrigerator Panel
W Width 22 5/16 56.67 26 1/16 66.20
H Height 69 1/8 175.58 69 1/8 175.58
SPACER PANEL in cm in cm
(A) Grille Panel
W Width 39 1/4 99.7 45 1/4 114.94
H Height 7 3/4 19.69 7 3/4 19.69
(B) Freezer Dispenser Panel
W Width 14 1/16 35.72 16 5/16 41.43
W1 Width 2 5.08 2 5.08
W2 Width 14 1/2 36.83 14 1/2 36.83
H Height 68 1/8 173.04 68 1/8 173.04
H1 Height 34 1/16 86.52 34 1/16 86.52
H2 Height 48 1/8 122.24 48 1/8 122.24
(C) Freezer Non-Dispenser Panel
W Width 14 1/16 35.98 16 5/16 41.43
H Height 68 1/8 173.04 68 1/8 173.04
(D) Refrigerator Panel
W Width 21 5/16 54.13 25 1/16 63.66
H Height 68 1/8 173.04 68 1/8 173.04
FRONT DECORATOR PANEL in cm in cm
(A) Grille Panel
W Width 40 1/4 102.24 46 1/4 117.48
H Height 8 3/4 22.23 8 3/4 22.23
(B) Freezer Dispenser Panel
W Width 14 7/8 37.78 17 1/8 43.50
W1 Width 2 1/4 5.72 2 1/4 5.72
W2 Width 14 1/4 36.20 14 1/4 36.20
H Height 69 1/4 175.90 69 1/4 175.90
H1 Height 34 5/16 87.15 34 5/16 87.15
H2 Height 47 13/16 121.44 47 13/16 121.44
(C) Freezer Non-Dispenser Panel
W Width 14 7/8 37.78 17 1/8 43.50
H Height 69 1/4 175.90 69 1/4 175.90
(D) Refrigerator Panel
W Width 22 1/8 56.20 26 7/8 68.26
H Height 69 1/4 175.90 69 1/4 175.90