To Next PageTo Next Page
Need help?Do you have a question about the Jenn-Air JWC2450ARS and is the answer not in the manual?
Identifies Jenn-Air models and their components, including model and serial number locations.
Provides contact details for Jenn-Air customer assistance and service centers.
Explains hazard symbols (DANGER, WARNING, CAUTION) and their meanings.
Decodes the Jenn-Air model number structure for identifying features and specifications.
Crucial safety notice about disconnecting power and discharging capacitors before testing.
Checks winding resistance to diagnose compressor health.
Verifies the compressor is not grounded to the unit chassis.
Tests the compressor's ability to start and run under load.
Methods to test capacitor functionality, including open, shorted, and leak checks.
Detects leaks in the condenser system using pressure and detection methods.
Tests for PTC relay resistance and electronic control thermistor accuracy.
Checks condenser motor coil resistance and light switch continuity.
Procedures for drier replacement and testing for system contamination.
Methods to check the evaporator for leaks using pressure or soap solution.
Provides resistance values for a thermistor at various temperatures.
Addresses problems caused by incorrect thermostat settings for ambient conditions.
Diagnosing issues by examining the uniformity of the evaporator frost pattern.
Correct placement and mounting of the thermostat's temperature sensing bulb.
Impact of glass shelf configuration on interior air circulation and temperature.
Problems related to thermostat failure or low refrigerant charge.
Faults in compressor valves or restrictions within the sealed system.
Issues with the interior light switch and its wiring connections.
Problems related to condenser fan operation and airflow obstruction.
Air leaks due to poor cabinet sealing or misaligned doors.
Diagnosing issues when the unit or its components do not function at all.
Troubleshooting when the interior light works but the compressor does not.
Specific checks for fan motor or compressor failure.
Correct function of the interior light switch and override settings.
Detailed steps for removing and installing the evaporator assembly.
Procedures for safely removing the compressor from the unit.
Steps for removing and installing the condenser coil and fan.
Procedures for servicing the condenser fan motor.
Steps to remove the evaporator thermistor from its mounting.
Visual representation of the unit's electrical connections and components.
Guidance on self-help and troubleshooting before contacting service.
General safety guidelines and warnings for appliance users.
Basic precautions for safe operation, maintenance, and use of the appliance.
Critical information on electrical hazards, grounding, and proper power connections.
Measures to prevent child entrapment and suffocation hazards.
List of necessary materials and tools for appliance installation.
Criteria for choosing an optimal and safe installation location.
Specifications for cabinet dimensions and required ventilation clearances.
Steps to attach and adjust the leveling legs for proper unit stability.
Ensuring the unit is level from side-to-side and front-to-back.
List of tools and materials required to reverse the door swing.
Detailed, sequential instructions for changing the door orientation.
Instructions for attaching a user-supplied custom handle to the door panel.
Specifications for custom wood panels, including dimensions and screw types.
Guidance on drilling and preparing the wood frame for lock installation.
Illustrations showing hinge attachment points on the door and cabinet.
Final steps for securing the custom panel and installing the door correctly.
Ensuring sufficient door opening for racks to be pulled out.
Instructions for adjusting the temperature control knob for desired settings.
Recommendations for optimal placement of wine bottles for storage and access.
Overview of adjustable temperature and automatic interior lighting.
Details on pull-out racks, door lock, and customizable wood rack fronts.
Methods for cleaning the cabinet, interior, door, and gasket.
Step-by-step guide for safely replacing the interior light bulb.
Advice on managing temperature during a power outage.
A table listing common issues and their potential causes and remedies.
Information on warranty duration, parts, and labor coverage.
Steps and information required to obtain service under warranty.
Conditions and damages that are not covered by the product warranty.
General| Brand | Jenn-Air |
|---|---|
| Model | JWC2450ARS |
| Type | Wine Cooler |
| Capacity | 24 bottles |
| Installation Type | Built-In |
| Temperature Zones | Dual |
| Door | Glass |
| Energy Star Certified | No |
| Color | Stainless Steel |
| Cooling System | Compressor |
| Weight | 110 lbs |
| Configuration | Freestanding |
| Number of Shelves | 5 |
| Shelves | Wooden |
| Height | 34.25 inches |
| Temperature Range | 41°F - 64°F |
