Need help?Do you have a question about the Jensen A540 DiXL V-2203 and is the answer not in the manual?
Guidelines for adding weight for machine stability and operation.
Step-by-step guide for safely starting the wood chipper.
Regular checks and tasks to keep the machine in optimal condition.
Information on knife maintenance, sharpening, and replacement for efficient cutting.
Key technical data, including maximum wood diameter and bolt forces.
Instructions for operating the undercarriage, adjusting width/height, and maneuvering.
Procedures for adjusting the machine's track width for stability and transport.
Procedures for adjusting the machine's track height for ground clearance.
Guidelines for safely loading, securing, and transporting the wood chipper.
Procedures for checking, adjusting, replacing, and maintaining the rubber tracks.
Instructions for checking and replacing oil in the geared motors.
Comprehensive schedule for routine maintenance tasks based on operating hours and time intervals.
Diagram and parts list for the machine's hydraulic system.
Diagram and parts list for the engine drive components.
Diagram and parts list for the main shaft assembly.
Diagram and parts list for the chipper disc and its components.
Diagram and parts list for the counter knife.
Information targeted at service personnel using the HMCflex.
A quick overview of the HMCflex device and its basic functions.
Detailed view of the HMCflex unit, identifying its components.
Explanation of the purpose and operation of the HMCflex control keys.
General information, introduction, target group, usage, and repair guidelines.
Overview of the HMCflex capabilities and applications for engine management.
Essential guidelines for safe and correct operation and maintenance of the HMCflex.
Procedure and contact information for sending the HMCflex for repair.
Instructions on connecting and operating the HMCflex unit.
Details on wiring and electrical connections for the HMCflex.
Steps for powering the HMCflex unit on and off, including error indication.
Guide to programming and changing factory settings on the HMCflex.
Visual guide to navigating the HMCflex setup menu and options.
Diagram illustrating the service menu options and adjustments.
Diagram detailing the security menu, PIN access, and settings.
Diagram for managing daily operating hours data on the HMCflex.
Diagram for managing total operating hours data on the HMCflex.
Diagram showing chipper-specific settings and parameters for the HMCflex.
Detailed explanations of all adjustable parameters within the HMCflex.
Explanation of language and other general settings within the HMCflex.
Configuration options for temperature and oil pressure sensors.
Settings related to operating magnets, speed regulation, and alarm outputs.
Configuration of time delays for error reporting and alarm activation.
Setting critical limit values for engine parameters like temperature and speed.
Explanation of engine speed measurement methods and terminology.
Control functions related to the chipper operation via HMCflex.
Technical specifications and hardware details of the HMCflex unit.
Wiring diagram for the HMCflex system.
Version history and document details for the HMCflex manual.
To Next Page
General
