How to fix a Jensen Automobile Accessories unit that will not turn on?
If your Jensen Automobile Accessories unit won't turn on, it could be due to several reasons. First, check the yellow and red wires to ensure they are properly connected and receiving the correct voltage (11~16VDC). Also, verify that the black wire is correctly connected to the ground. Finally, inspect the fuse(s) and replace them if they are blown.
Why does my Jensen CAR710W unit keep blowing fuses?
If your Jensen Automobile Accessories unit keeps blowing fuses, there are a few potential causes. Check the yellow and red wires to ensure they are not touching the chassis ground, looking for any pinched wires. Also, inspect the speaker wires to make sure they are not touching the chassis ground, again checking for pinched wires. Finally, verify that you are using fuses with the correct rating.
What to do if my Jensen CAR710W Automobile Accessories unit has power but no sound?
If your Jensen Automobile Accessories unit has power but no sound, the issue might be with the speaker connections. First, check the connections at the speakers to ensure they are properly connected. Also, ensure that none of the speaker wires are touching each other or the chassis ground; insulate any bare speaker wires to prevent this.
What to do if my Jensen CAR710W unit has audio but no video?
If your Jensen Automobile Accessories unit has audio but no video, the problem may be related to the parking brake safety circuit. Check the connections at the parking brake to ensure they are properly connected. Also, ensure that the parking brake is applied.
General| Bluetooth | Yes |
|---|---|
| USB Ports | 1 |
| Resolution | 800 x 480 |
| Touchscreen | Yes |
| Apple CarPlay | No |
| Android Auto | No |
| Backup Camera Input | Yes |
| Steering Wheel Control Compatible | Yes |
| Peak Power Output | 50 watts |
| AM/FM Radio | Yes |
| DVD Player | No |
| GPS Navigation | No |
| Display Size | 7 inches |
| Audio Formats Supported | MP3, WMA |
| Preamp Voltage | 2V |
Safety feature to prevent driver distraction during video playback.
Precautions and initial steps before unit installation, including battery disconnection.
Details on trim ring and mounting screws required for installation.
Explanation of numbered icons for radio display functions like Reset, Volume, and Source.
How to control power, adjust volume levels, and mute the audio output.
Accessing different modes and navigating the main menu for source selection.
Connecting external A/V inputs and using the reset function for troubleshooting.
Adjusting date, time, time format, beep tone, radio area, and time zone.
Configuring equalizer presets, time alignment, loudness, and subwoofer settings.
Adjusting screen brightness, dimmer mode, and viewing system version.
Adjusting audio equalization, fader, and balance for optimal sound.
Setting speaker time delay for optimal sound staging and driver focus.
Instructions for tuning stations, storing presets, and managing AM/FM bands.
Adjusting screen brightness and using seek/scan tuning features.
Returning to the main menu and selecting USB as the audio source.
Using track skip, play/pause, repeat, random, and search functions for USB audio.
Steps to pair and connect Bluetooth devices, including device naming.
Accessing contacts, managing the phone book, and reviewing call logs.
Managing music playback and audio transfer via Bluetooth connection.
Handling incoming/outgoing calls, using the keypad, and ending calls.
Information on SiriusXM satellite radio service, requirements, and benefits.
Steps for activating your SiriusXM subscription and accessing channels.
Selecting bands, managing preset SiriusXM channels, and displaying channel lists.
Viewing program details, artist/song info, and searching for channels.
Accessing mode settings, using tune scan, and resuming live broadcast.
Managing parental controls and locking specific SiriusXM channels.
Using preset buttons and direct channel entry for quick access.
Navigating tracks, pausing, resuming, and fast forwarding/rewinding.
Connecting an iPhone to the unit via USB for wired Apple CarPlay.
Pairing and connecting an iPhone wirelessly for Apple CarPlay.
Using touch, swipe, and drag gestures for basic CarPlay interaction.
Steps to disconnect the iPhone and exit the CarPlay mode.
Requirements for Android Auto, and steps for wired connection.
Pairing and connecting an Android device wirelessly for Android Auto.
Navigating the Android Auto home screen and using Google Assistant.
How to exit Android Auto mode via button press or phone disconnection.
Connecting an audio/video source to the rear RCA input.
Connecting and operating the optional rear camera input.
List of available SWC controls and their function mapping for the unit.
Programming tips for the PAC SWI-RC adapter to ensure proper SWC functionality.
To Next Page
