What to do if the remote control for my Jensen JE1913AC2 does not function?
If the remote control for your Jensen LCD TV isn't working, replace the batteries with new ones, ensuring that the battery polarity is correct. Also, make sure you are pointing the remote directly at the TV's IR receiver.
Why is there no sound on my Jensen LCD TV?
If there is no sound on your Jensen LCD TV, make sure the connected audio cables are fully inserted. Also, check that you've selected the correct audio source from your amplifier. The mute function may also be enabled, so press the mute button on the remote.
Why is my Jensen JE1913AC2 LCD TV showing no picture?
If your Jensen LCD TV shows no picture, the digital TV channel signal may be weak, so try another channel. Press the INPUT button to ensure the desired input is selected. Also, re-connect the antenna or cable wiring. As a last resort, restore the default settings.
How to fix video noise or choppy picture on my Jensen JE1913AC2?
To fix video noise or a choppy picture on your Jensen LCD TV, try readjusting the antenna. Also, keep the TV away from noise sources like neon lights and microwave appliances.
Why can't my Jensen JE1913AC2 receive certain channels through the antenna?
If your Jensen LCD TV cannot receive certain channels through the antenna, perform a Channel Scan to add channels into the TV tuner memory. You can also readjust your antenna and retry the Auto Channel Scan. It's also possible that the signal from the TV station is weak in your area.
What to do if my Jensen JE1913AC2 LCD TV is blocked on certain channels?
If your Jensen LCD TV is blocked on certain channels, perform a Channel Scan to add channels into the TV tuner memory. Check whether the channel was deleted. Also, check the parental control settings and, if necessary, restore the default settings.
Why is there no color on my Jensen LCD TV?
If there is no color on your Jensen LCD TV, check the video installation of your external A/V equipment.
What does a black box on the screen of my Jensen LCD TV mean?
If you see a black box on the screen of your Jensen LCD TV, the “Text” option may be enabled but no text is available. Try pressing the CCD button on the remote control to turn it off.
Why can't I use certain functions on my Jensen LCD TV?
If the item chosen in a menu is shown in gray text, that item cannot be selected in the current input.
A brief warning to read the manual before use.
Guidance on proper grounding procedures for outdoor antennas to prevent surges.
Instructions on preventing electrical shock and damage from power issues and liquid.
Covers replacement parts, safety checks, wall mounting, and regulatory compliance.
On-screen guide for initial TV setup, including picture, antenna, and channel scan.
Steps for setting up TV channels and performing an automatic channel scan.
Setting up parental controls for TV and movie content based on ratings.
Configuring parental controls using Canadian TV and movie rating guidelines.
Troubleshooting common TV issues with possible solutions and checks.
General| Screen Size | 19 inches |
|---|---|
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Speakers | 2 x 3W |
| USB Ports | 1 |
| HDMI Ports | 1 |
| Viewing Angle | 170° (H) / 160° (V) |
| Inputs | Composite, VGA, HDMI |
| Outputs | Headphone |
| VESA Mount Compatible | 75mm x 75mm |
| Display Type | LED |
| Brightness | 200 cd/m2 |
To Next Page
