To Next PageTo Next Page
Need help?Do you have a question about the Jensen JENROLL EX12 and is the answer not in the manual?
Provides identification details for the JENSEN JENROLL EX 12 machine model.
Daily cleaning and maintenance procedures for the machine.
Weekly cleaning and maintenance procedures for the machine.
Monthly cleaning and maintenance procedures for the machine.
Quarterly cleaning and maintenance procedures for the machine.
Half-yearly cleaning and maintenance procedures for the machine.
Procedure for adjusting the V-belt tension.
Adjusting roller position for optimal feeding and load.
Steps for changing gear oil and lubricating roller bearings.
Procedure for changing packing seals on roller gears.
How to raise rollers to the service position.
Maintenance and cleaning of the machine's drip tray.
Instructions for changing round springs in rollers.
Procedure for performing an ironer hydrotest.
Adjusting the exhaust system and fan damper settings.
Adjusting the tensioner for the ironer tapes.
Procedures for waxing and cleaning the ironer chests.
Steps for replacing the ironer tapes.
Maintenance and cleaning of the air-pressure filter.
Procedure for tightening the inlet belts.
Instructions for changing the machine belts.
Measuring and checking the roller diameter.
Adjusting air cylinder speed and braking.
Procedure for changing padding on round spring rollers.
Performing pH tests on linen before production.
Critical safety warnings and operational procedures for machine use.
Specifies types of wax for 1-4 roll machines.
Lists recommended lubricants for roller bearings and gears.
Lubrication recommendations for chains and racks.
Recommended oil quality for gear lubrication.
Template for recording executed maintenance work and replaced parts.
General