5-376-000106
REV. 0 - 09/07
© 2007 Jerr-Dan Corporation. All Rights Reserved.
FOREWORD
This manual is intended to serve as a guide to the owner and operator in the
safe operation and optimum performance of this Jerr-Dan equipment.
Establishment of good operating habits and familiarity with the equipment
and its capabilities combined with good judgement are essential.
Before attempting to operate the unit carefully read all sections of this manual.
This manual should be kept with the equipment at all times and referred to
whenever in doubt of proper operation.
Information contained in this manual reflects how this vehicle was built at the
factory. Modifications or additions by the distributor or owner are not re-
flected in this manual.
This manual does not include operation and maintenance information for the
commercial chassis (International, Ford, GM, etc.). This information is pro-
vided by the chassis manufacturer.
When inquiring about operation, maintenance or warranty, please have ready
your equipment’s Sales Order Number, Serial Number and Model Number.
This information can be found on the aluminum tag riveted to the back inside
right corner of the toolbox on the driver’s side.
Jerr-Dan Corporation strives to provide information that is accurate, com-
plete and useful. All information contained in this manual is as accurate as
known at the time of publication and is subject to change, without notice, as
a result of continuous product improvements. Jerr-Dan reserves the right to
amend the information in this document at any time without prior notice.
Should you find inadequacies in the text, please send your comments to the
following address:
Jerr-Dan Corporation
Attn: Technical Publications
1080 Hykes Road
Greencastle, PA 17225
or by e-mail at technicalpublications@jerr-dan.com.
Eastern Wrecker Sales Inc
To Next Page
Loading...
Need help?
General
