allowing you control over each channel’s gain level AND individual output
levels.
FEATURES
● 2-Channels with independent preamp and master volume controls
CRUNCH and OVERDRIVE
● 20 watts of tube power
● Tube-buffered serial effects loop
● Parallel 8 and single 16-ohm speaker outputs
● Foot-switch for channel switching
● CRUNCH Channel Preamp Gain: Adjust the amount of gain (distortion) that
the amplifier produces in the CRUNCH Channel.
● OVERDRIVE Preamp Gain: Adjust the amount of gain (distortion) in the
OVERDRIVE Channel. The higher the preamp setting the more overdriven
the sound will be.
● BASS, MIDDLE and TREBLE: allow you to control the tone.
● CRUNCH Master Volume: will let you adjust how loud the CRUNCH
Channel’s output will be.
● OVERDRIVE Master Volume: will let you adjust how loud the OVERDRIVE
Channel’s output will be, independent of the CRUNCH Master Volume.
● PRESENCE: adds an overall brightness, which can be handy when trying to
cut through in a ‘dead’ room.
To Next Page
Loading...
