To Next PageTo Next Page
Need help?Do you have a question about the Jet DC-1100A and is the answer not in the manual?
General| Motor Power | 1.5 HP |
|---|---|
| Airflow | 1100 CFM |
| Weight | 75 lbs |
| Inlet Diameter | 4 inches |
| Dust Bag Capacity | 2.64 cu. ft. |
| Collection Bag Capacity | 2.64 cu. ft. |
| Motor Phase | 1 Ph |
| Filter Area | 100 sq ft |
| Dust Capacity | 2.64 cu. ft. |
| Filtration | 2 Micron Bag |
Declares compliance with key EU directives (Machinery, EMC, Low Voltage, RoHS) and relevant standards for safety and performance.
Specifies the dust collector is designed for sucking wood dust only; other applications require manufacturer consultation.
Emphasizes reading the manual, understanding hazards, and following operating and maintenance instructions for safe use.
Highlights potential risks such as dust injury, electrical hazards from damaged cords, and explosion danger if not properly grounded.
Provides key specifications including dust inlet size, air flow, vacuum pressure, capacity, dimensions, weight, and electrical requirements.
Details the acoustic pressure level (EN ISO 3744) and notes that specified values are emission levels, not necessarily safe operating levels.
Lists the items included in the package, such as filter bag, canister filter, casters, dust inlets, and collection bags.
Covers initial assembly tasks like attaching casters, motor/fan assembly, and inlet guards with diagrams and part references.
Instructions for fitting the collector bag, including folding over the snap ring and inserting it into the housing.
Details on attaching the filter bag support rods and installing the bag with its retainer strap.
Guidance on attaching the hose with clamps and mounting the canister filter with its handle and knobs.
Information on connecting ductwork and the importance of grounding the system to prevent explosions.
Covers mains connection requirements, extension cords, and starting/stopping the machine using the ON/OFF buttons.
General notes on performing maintenance, cleaning, and inspections, emphasizing disconnecting power and replacing defective safety devices.
Instructions for cleaning the filter, including using a mask and rotating the handle for dust removal.
Procedure for safely changing the collector bag, requiring power disconnection and the use of a mask.
Addresses issues like the unit not starting or weak airflow, suggesting checks for electricity, fuses, switches, motors, or clogged filters.
Lists optional accessories such as PVC hoses, hose clamps, collection bags, and automatic start units.
