EasyManua.ls Logo

Jet JPW-20 User Manual

Jet JPW-20
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation MANUAL
MODE d’emploi
20 Gallon Parts Washer – Heavy Duty
Bac de nettoyage de pièces – 20 gallons – Usage intensif
Prod. No. / N° du prod. 355007 Mod. No. / N° du mod. JPW-20
A / Une / Una
Brand / Marque / Marca
surewerx.com
Un partenaire
A
Partner
M16-HT355007
Question and Answer IconNeed help?

Do you have a question about the Jet JPW-20 and is the answer not in the manual?

Jet JPW-20 Specifications

General IconGeneral
BrandJet
ModelJPW-20
CategoryWasher
LanguageEnglish

Summary

Safety and Warnings

Indoor Use and Cleaning Solution

Specifies indoor use and aqueous cleaning solution pH 7-8. Solvents outside this range are prohibited.

Electrical and Safety Requirements

Requires GFCI protection, disconnect before servicing, keeping children away, and prohibiting alcohol/drugs during operation.

Operation and Ventilation

Keep parts below sink edge, maintain clean area, use near heat sources, and ensure adequate ventilation.

Liquid Level and Fumes

Do not overfill or operate with low liquid. Use mask or respirator when near fumes.

Additional Safety Precautions

Personal Protective Equipment

Use eye protection (goggles), gloves, safety shoes, and a protective hair covering.

Operational Awareness and Checks

Maintain proper footing, stay alert, and check for damaged parts before use.

Maintenance and Storage Guidelines

Use identical replacement parts, store idle equipment dry, and maintain tools with care.

Electrical Grounding Procedure

Disconnect power before servicing and use the star washer for electrical grounding.

Cleaning Solutions

Aqueous-based Cleaning Solution Requirements

Use aqueous-based cleaning solution only with a pH range of 7-8.

Troubleshooting

Corrective Procedure for Flow Issues

Steps to diagnose and fix reduced volume flow or no flow from the flex hose nozzle.

Assembly Instructions

Initial Setup and Leg Attachment

Unpack, lay machine on lid, and attach legs and lower shelf using provided hardware.

Component Installation

Install work shelf, basket, pump assembly, and filter screen into the machine.

Final Assembly Steps

Tighten all screws, stand machine upright, connect power, fill fluid, and turn on.