Jet Ocean Pearls - Page 36

Check Box When This Step is Complete
After the unit is properly seated on the front and rear securing bolts of
elevator # 1, tighten the bolts with a Phillips head screw driver.
Check Box When This Step is Complete
Step # 7-E
Attach the two wires to the mechanical switch as shown. The BLACK
wire should be installed on the LEFT pole and the YELLOW wire should
be installed on the MIDDLE pole.
Step # 7-C
After the unit is properly seated on the front and rear securing bolts of
elvator # 2, tighten the bolts with a Phillips head screw driver.
Check Box When This Step is Complete
Step # 7-D
INSTALLATION INSTRUCTIONS
Jennison Entertainment Technologies Ocean Pearls Service Manual Page 36