Need help?Do you have a question about the JetChill Mini and is the answer not in the manual?
Details on the Mini Machine's operation, materials, size, and weight.
Specifications for the food-grade polycarbonate cocktail glass, including size, volume, and warnings.
Details for the shot-tail glass, covering material, size, volume, and usage warnings.
Specifications for the shot glass, including material, size, volume, and warnings for use.
Ensure correct Rubber O Ring/Plastic Washer placement on the cylinder hose end.
Securely attach the UK or USA cylinder hose to the CO2 cylinder.
Open the cylinder valve 90 degrees anticlockwise and check for leaks.
Plug the power lead into the machine and mains; verify the red LED indicator.
Place glass on probe nipple and press charge button to prime gas.
Charge Shot-Tail/Cocktail glass for 12s or Shot glass for 6s.
Ensure glass is 90% full with dry ice for smoke and chill effect.
Turn glass upside down and tap to remove excess dry ice above diffuser.
Close cylinder valve 90 degrees clockwise at end of use or cylinder change.
Press and hold the charge button to purge gas through the machine.
Unscrew hose anticlockwise and store cylinders safely per guidelines.
Details on the Mini Machine's operation, materials, size, and weight.
Specifications for the food-grade polycarbonate cocktail glass, including size, volume, and warnings.
Details for the shot-tail glass, covering material, size, volume, and usage warnings.
Specifications for the shot glass, including material, size, volume, and warnings for use.
Ensure correct Rubber O Ring/Plastic Washer placement on the cylinder hose end.
Securely attach the UK or USA cylinder hose to the CO2 cylinder.
Open the cylinder valve 90 degrees anticlockwise and check for leaks.
Plug the power lead into the machine and mains; verify the red LED indicator.
Place glass on probe nipple and press charge button to prime gas.
Charge Shot-Tail/Cocktail glass for 12s or Shot glass for 6s.
Ensure glass is 90% full with dry ice for smoke and chill effect.
Turn glass upside down and tap to remove excess dry ice above diffuser.
Close cylinder valve 90 degrees clockwise at end of use or cylinder change.
Press and hold the charge button to purge gas through the machine.
Unscrew hose anticlockwise and store cylinders safely per guidelines.
To Next Page
General