JetChill Mini - Quick Start Guide: Pre-Use Procedures; Step 1: Hose Preparation; Step 2: Connecting Hose to Cylinder; Step 3: Opening Cylinder Valve

STEP
1
•
Ensure black Rubber O Ring/white Plastic
Washer is on the Cylinder End of the
Cylinder Hose
•
Replacement O Rings/Washers supplied
in Tool Kit, contact JetChill for additional
replacements
STEP
2
•
Hand screw UK Cylinder Hose clockwise
tight, onto Cylinder of Food Grade Liquid
Co2 (with Dip Tube)
•
Wrench screw USA Cylinder Hose
clockwise tight, onto Cylinder of Food
Grade Liquid Co2 (with Dip Tube)
STEP
3
•
Open Cylinder valve by hand turning
Valve 90 degrees anticlockwise
•
Ensure Connection not frosting or
making a hissing sound from Co2 Gas
leaking
STEP
4
•
Plug Power Lead into Mains and side of
Machine
•
Red LED on the Machine will light up
QUICK START GUIDE – Pre Use
UK USA
UK USA