CHANGING CYLINDER
STEP 13
• To change Cylinder close Cylinder Valve
by hand turning valve 90 degrees
clockwise
STEP 14
• Press NORMAL Charge Button to purge
Co2 through Machine
• Repeat until no more Co2 comes out
STEP 15
• Unscrew Hose from Cylinder anti
clockwise using wrench
• Ensure black Rubber O Ring is in the
Cylinder End of the Gas Hose
STEP 16
• To add new Cylinder screw Gas Hose
clockwise tight, onto Cylinder using
Wrench provided
• Open Cylinder valve by hand turning Valve
90 degrees anticlockwise
• Ensure Connection not frosting or making
a hissing sound from Co2 Gas leaking
To Next Page
Loading...