JetChill Twin Probe User Manual

Problem Check Y/N Action Picture
STEP 1
Machine does
not power up
Is the unit plugged
in?
No Plug Power Lead into mains supply
and Machine
Yes Next check
Is the green light lit
on the Power
Supply?
No Check fuse in main Plug, replace if
necessary
Check power socket on Machine
end of Power Lead is not damaged
If fuse is OK or socket is damaged
then contact JetChill for
replacement Power Supply
Yes Next check
Do the LED and blue
charge buttons turn
on?
No Contact JetChill as Machine may
need to be returned to factory to
replace PCB
Yes Machine is ready to use
USER GUIDE - Trouble Shooting
STEP 2
Machine LED
lights come on
but blue Charge
Buttons do not
Is the Lid closed
correctly?
No Fully close Lid
Yes Next check
Are the Charge
Button Magnets in
the correct position?
No There
is a Magnet in the rubber seal
of the bottom left side of the Lid
This attracts to the magnet
underneath the Control Panel
located next to the Normal Charge
Button
Place a magnet over the Normal
Charge Button
If the blue light comes on contact
JetChill as Machine may need to be
returned to factory to reposition
Magnet
Yes Next check
Is the Control Pad
working?
No Contact JetChill as Machine may
need to be returned to factory to
replace Control Pad
Yes Machine is ready to use

JetChill Twin Probe Specifications

General

Brand	JetChill
Model	Twin Probe
Category	Kitchen Appliances
Language	English