47
Connections
1 Select Menu, Settings and press OK
2 Select Connections and press OK
Depending on the network operator, you
can use the following services:
Network selection:
You can choose between automatic or
manual Network selection chooses.
M1/M2 Direct numbers
4. Select Menu ā Settings and press OK
5. Select M1/M2 Direct numbers and
press OK
Here you can see and edit the M1 and M2
Numbers
Press the M1 or M2 button in the standby
mode to dial the stored phone number
Restore factory settings
With this function you can reset the
phone settings to the factory-set
configuration.
You must enter the password to restore
factory settings. The default password is:
1234.
To Next Page
Loading...
