EasyManua.ls Logo

Jetinno JLTT-ES Presto User Manual

Jetinno JLTT-ES Presto
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE MANUAL
Guangzhou Jetinno Electronics Appliance CO.,Ltd.
3/Floor, No. 3, Qiming building, Tianfeng Road, Science Park, Luogang District, Guangzhou, PRC (510660)
www.jetinno.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Jetinno JLTT-ES Presto and is the answer not in the manual?

Jetinno JLTT-ES Presto Specifications

General IconGeneral
BrandJetinno
ModelJLTT-ES Presto
CategoryCoffee Maker
LanguageEnglish

Summary

1 BEFORE USE

1.2 IMPORTANT SAFTY ADVICE

Provides critical safety instructions and warnings for machine operation and maintenance.

2 ABOUT THIS MACHINE

2.2 USER INTERFACE

Describes the touch panel display, icons, and buttons for user interaction.

3 TRANSPORT AND STORAGE

4 MACHINE DESCRIPTION

4.4 WATER SUPPLY

Specifies requirements for connecting the machine to the water mains.

5 INSTALLATION

5.1 UNPACK THE MACHINE

Step-by-step guide on how to unpack the vending machine safely.

5.2 PUTTING UP

Instructions for positioning and leveling the machine correctly.

5.4 CONNECT THE MACHINE TO WATER MAINS

Procedure for connecting the machine to the main water supply.

5.5 CONNECT THE MACHINE ELECTRCITY MAINS

Procedure for connecting the machine to the electrical power supply.

5.6 FILL THE CONTAINERS

Instructions on how to fill the machine's product containers.

5.8 SWITCH ON THE MACHINE

Instructions for powering on the machine after installation.

5.9 FILL THE BOILER

Procedure for filling the machine's boiler with water.

5.10 MACHINE QUICK SETTING UP

Overview of initial quick setup procedures for the machine.

6 USE THE MACHINE (END USER)

6.1 GET THE DRINK FROM MACHINE

Step-by-step guide for end-users to select and dispense drinks.

7 CLEANING AND MAINTENANCE

7.1 SAFETY REGULATIONS FOR CLEANING AND MAINTENANCE

Essential safety instructions and warnings before performing cleaning or maintenance.

8 PROGRAMMING

11 Q&A

Related product manuals