2. Make Moves
2.1 Getting on the JetKart
®
Adjust the Brackets
so they are tight on
the hoverboard then
tighten Bolt
Loosen Bolt to adjust
Brackets on top of the
hoverboard
1. Place the JetKart® on a flat surface with the hoverboard turned off.
2. Carefully take a seat and place your feet on the Foot Rest.
3. Make sure the hoverboard is leveled.
4. Now it’s time to turn on your hoverboard.
Note: If the hoverboard is not leveled when you turn it on, the JetKart®
will go forward or backward immediately.
• Run the Velcro Straps
through the Adjustable
Brackets
• Pull the Velcro Straps
tight and fold
To Next Page
Loading...
