6
ASSEMBLY
The Journey comes partially assembled. In order to fully assemble, you will
need to attach the Handlebars, the Front Wheel, the Disc Brake, and the
Saddle. Please refer to the diagrams on pages 4 and 5 while assembling your
Journey. If you are having difculty assembling the Journey, please call our
customer service or take your Journey to a local bike shop.
Please Note: Pictures may vary slightly from the actual product.
Assembling the Handlebar
• First, make sure the Handlebar Stem is facing forward, towards the Front
Fork.
• Unscrew the 4 bolts in the Handlebar Stem using the provided Allen Key.
Handlebar Stem
To Next Page
Loading...
Need help?
General
