Jetson Light Rider 12 User Manual

Designed in Brooklyn | Made in China
U.S. Patent No. 11,155,315
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE.
MODEL: JLRG12-RGR
Light Rider (JLR) 12"
Kids Light-Up Bicycle.
A guide for your ride.

Jetson Light Rider 12 Specifications

General

Brand	Jetson
Model	Light Rider 12
Category	Bicycle
Language	English

Summary

Getting Started

Training Wheels Assembly

Remove axle nut and washer from the rear wheel using the wrench.

Front Wheel Assembly

Loosen and remove nuts and washers from the front wheel axle using the wrench.

Handlebar Assembly

Loosen the cap bolt, insert handlebar into stem post, and adjust height.

Seat Assembly

Slide seat into seat post, ensure insertion mark is hidden, and secure clamp.

Pedals Assembly

Slide and hand-tighten pedals 'R' and 'L' into crank arms, then secure with wrench.

Using the LED Lights

Battery Insertion

Unlock battery compartment by pushing and twisting counter-clockwise, then insert 3 AA batteries.

Activating the Lighting

Turn lights on/off by holding power button; cycle modes by holding mode button.

Making Moves

Operating the Coaster Brake

Engage the coaster brake by pedaling in reverse; faster pedaling increases braking.

Helmet Safety

Ensure proper helmet positioning, covering the forehead, for maximum protection during falls.

Riding the Jetson Light Rider 12"

Begin riding the assembled Jetson Light Rider 12" to enjoy your ride.

Care & Maintenance