M
S
P
2.1 Using the Remote Control
2. Making Moves
• USE THE SCREWDRIVER TO OPEN THE BATTERY COMPARTMENT COVER ON THE BACK OF THE REMOTE CONTROL.
INSERT 2 AAA BATTERIES. REPLACE THE COVER AND SECURE BY TIGHTENING THE SCREW WITH THE SCREWDRIVER.
NOTES: AFTER 10 SECONDS OF NON-OPERATION, THE REMOTE WILL GO INTO POWER-SAVING MODE
TO PRESERVE BATTERY LIFE.
* THE REMOTE CONTROL NEEDS TO BE PAIRED WITH THE VEHICLE UPON FIRST USE AND AFTER BATTERY REPLACEMENT.
TO PAIR THE REMOTE CONTROL WITH THE SAFARA:
1. PRESS AND HOLD THE MATCH BUTTON FOR 2 TO 4 SECONDS. THE LED LIGHTS ON THE REMOTE CONTROL WILL FLASH.
2. FLIP THE POWER SWITCH ON THE SAFARA DASHBOARD TO TURN THE SAFARA ON.
(REFER TO PAGE 51 OF THIS MANUAL.)
3. IF THE LIGHTS CONTINUE TO FLASH, THE PAIRING HAS BEEN UNSUCCESSFUL. REMOVE AND REINSERT THE BATTERIES
AND REPEAT STEPS 1 AND 2.
MATCH
TOGGLE SPEED BETWEEN
FAST AND SLOW MODES.
LED LIGHTS
PARK
TURN RIGHT
TURN LEFT
FORWARD
REVERSE
To Next Page
Loading...
