JETWAY 993AN User Manual

993AS-L/993AS
/993AN
USER'S MANUAL
PCIAGP Mainboard
For
Pentium

II/
III or Socket 370
The author assumes no responsibility for any errors or omissions which
may appear in this document nor does it make a commitment to update
the information contained herein.
NO. G03-993ANR3A
Release date: NOV 2000
** Year 2000 compliant **
Trademark:
* Pentium is registered trademark and MMX is a trademark of Intel corporation,
the other names and brands are the property of their respective owners.
* Specifications and Information contained in this documentation are furnished for information use only, and are subject to
change at any time without notice, and should not be construed as a commitment by manufacturer.

JETWAY 993AN Specifications

General

Form Factor	ATX
Expansion Slots	1 x PCIe x16
Audio	Realtek ALC662 6-Channel
Storage Interfaces	4 x SATA 3Gb/s
USB Ports	8 x USB 2.0 (4 on back panel, 4 via headers)

Summary

Chapter 1: Introduction and Features

1-1 Preface

Provides an overview of the motherboard's purpose and market positioning.

1-2 Feature of Motherboard

Details the key characteristics and capabilities of the motherboard.

1-2-1 Overview

Describes the general design and primary functions of the motherboard.

Chapter 2: Hardware Installation

2-1 Unpacking

Details the procedure for safely opening the mainboard package and inspecting components.

2-2 Mainboard Diagram

Illustrates the physical layout and components of the motherboard.

2-3 Quick Reference for Jumpers, Connectors & Expansion Socket

Provides a lookup for key board elements and their locations.

2-4 Installation Steps

Outlines the sequential process for installing hardware components onto the motherboard.

2-5 Jumper Settings

Explains the configuration of jumpers for system frequency and CPU ratio.

2-6 System Memory (DRAM)

Details the supported DRAM modules and maximum memory capacity.

2-7 Central Processing Unit (CPU) - Slot 1 Installation

Describes CPU installation for Slot-1 processors and related settings.

2-7 Central Processing Unit (CPU) - Socket 370 Installation

Describes CPU installation for Socket 370 processors and related settings.

2-8 Expansion Cards

Details the process and considerations for installing expansion cards.

2-9 External Connectors

Describes the various external ports and their functions.

Chapter 3: AWARD BIOS Setup

3-1 STANDARD CMOS SETUP

Configures basic system settings like date, time, and drive types.

3-2 BIOS FEATURES SETUP

Adjusts advanced BIOS parameters for system performance.

3-3 CHIPSET FEATURES SETUP

Configures chipset-specific settings, including CPU host/PCI clock.

3-4 POWER MANAGEMENT SETUP

Configures system power saving modes and ACPI functions.

3-5 PnP/PCI CONFIGURATION SETUP

Manages Plug and Play and PCI bus configurations.

3-6 LOAD OPTIMAL DEFAULTS

Resets BIOS to factory optimal settings.

3-7 LOAD STANDARD DEFAULTS

Resets BIOS to factory standard settings.

3-8 INTEGRATED PERIPHERALS SETUP

Configures on-board I/O functions and devices.

3-9 SUPERVISOR/USER PASSWORD

Sets system passwords for access control.

3-10 SAVE & EXIT SETUP

Saves changes and exits the BIOS setup utility.

3-11 EXIT WITHOUT SAVING

Exits BIOS setup without saving any changes.

Chapter 4: Software Installation

4-1 Mainboard Driver Installation for Windows

Guides the installation of essential motherboard drivers for Win9X/WinNT.

4-2 PC Health Monitor Software

Explains the installation and function of the PC Health Monitor utility.

4-3 Sound Driver and Audio Rack Installation

Details the installation of audio drivers and related software.