To Next PageTo Next Page
Need help?Do you have a question about the JETWAY J7F4-F and is the answer not in the manual?
General| Form Factor | Mini ITX |
|---|---|
| USB Ports | 6 x USB 2.0 |
| Audio | Realtek ALC662 HD Audio CODEC |
| LAN | Realtek RTL8111 Gigabit LAN |
| Internal I/O | 1 x 24-pin ATX power connector, 1 x 4-pin ATX 12V power connector, 2 x USB 2.0 Headers, 1 x COM Header |
| Dimensions | 17 cm x 17 cm |
| Video Outputs | VGA |
Details the performance, capabilities, and target markets of the VIA CN700 chipset motherboard.
Lists the technical specifications of the motherboard including design, chipset, CPU, memory, expansion, I/O, and BIOS.
Provides a visual diagram of the motherboard layout, component placement, and jumper settings.
Lists the sequence of steps for installing hardware components on the motherboard.
Explains how to check and set motherboard jumpers for specific functions like power on and CMOS clear.
Defines technical terms used in the manual, such as Chipset, Processor socket, Slot, AGP, PCI, USB, BIOS, Driver.
Describes how to set CPU bus and memory clock frequencies, noting the jumper-less design.
Provides warnings and instructions for overclocking the system via BIOS setup.
Details the process of installing DDR2 SDRAM modules, including valid configurations and compatibility notes.
Covers the procedure for installing expansion cards and managing Interrupt Request assignments.
Details various physical connectors and headers on the motherboard for system components and peripherals.
Provides instructions on how to power on the computer, including POST checks and beep codes.
Describes how to enter the BIOS setup utility by pressing specific keys during boot-up.
Explains how to use the help features within the BIOS setup utility for assistance.
Displays the main menu of the AwardBIOS CMOS Setup Utility and explains navigation keys.
Details the configuration options available in the Standard CMOS Setup menu, like date, time, and disk settings.
Lists and explains advanced BIOS settings related to system features like virus warnings, cache, and boot options.
Allows modification of chipset registers to optimize system performance.
Explains how to adjust DRAM timing parameters for performance tuning.
Details AGP (Accelerated Graphics Port) timing settings for graphics performance.
Covers PCI (Peripheral Component Interconnect) timing settings for interface performance.
Allows configuration of integrated peripherals like IDE, audio, and onboard devices.
Configuration options for the onboard IDE interface, including PIO and UDMA modes.
Settings for various onboard devices such as LAN, AC97 Sound, and USB controllers.
Configuration for onboard Super IO functions like FDD, Serial Ports, and Parallel Ports.
Options for configuring power saving features and system power states.
Settings for system wake-up events, such as by PCI LAN or RTC alarm.
Setup for Plug and Play (PnP) and PCI bus configurations, including IRQ resources.
Displays system health information like CPU temperature, fan speed, and voltages.
Settings for miscellaneous system controls like PCI clock and spread spectrum.
Options to load default BIOS settings for stability or performance.
Allows setting supervisor or user passwords for BIOS access control.
Instructions for installing the VIA Service Pack 4-in-1 driver.
Instructions for installing the VIA CN700 VGA driver.
Instructions for installing the ALC655 AC97 Codec Audio Driver.
Instructions for installing the Realtek LAN controller driver.
Instructions for installing the VIA USB2.0 device driver.
Instructions for installing the PC-CILLIN 2006 anti-virus program.
Steps to disable the onboard sound function via BIOS setup.
Instructions on how to update the system's BIOS using Award Flash Utility.
