Troubleshooting
Specifications
Environment
EN
07
d) Insert the brush roller back into the floor brush and
lock it firmly into place on the other side.
Machine Cannot
Clean Well
Machine Stops or
Doesn't Work
Failure Solutions
1. Empty the dust cup.
2. Check if the dust cup is correctly
assembled.
3. Check if the filter is correctly
assembled.
4. Clean the filter.
1. Charge the battery.
2. Clean the filter.
Battery Doesn't
Charge
Floor Brush
Doesn't Work
1. Check the connections with the
power cord.
2. Check the wall mount connection.
1. Make sure the dust cup is
assembled correctly and locked
properly.
2. Make sure the floor brush and the
metal tube are tightly connected.
3. Check for any blockage in the
brush.
Model C300
Voltage DC 25.9V
Rated Power 400W
Charger Input Voltage 100-240V
Charger Output Voltage DC 30V
Charging Time 4H
• Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
• Contact your local government for information
regarding the collection systems available.
• If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well-being.
• When replacing old appliances with new ones, the
retailer is legally obligated to take back your old
appliance for disposals at least free of charge.
Compliance Statements
This product is in compliance with the standards of
the European Community.
This product complies with the Restriction of
Hazardous Substances in Electrical and Electronic
Equipment (RoHS) EU rules restricting the use of
hazardous substances in electrical and electronic
equipment to protect the environment and public
health.
This product is in compliance with the applicable
requirements for products sold within Great
Britain.
This symbol indicates that the product is capable
of being recycled.
This symbol indicates that the product should not
be disposed of as household waste. The product
must be sent to separate collection facilities for
recovery and recycling of electrical and electronic
equipment.
This symbol indicates that the product should be
kept away from rain and in dry conditions.
The warning sign indicates a potential hazard,
danger, obstacle, or condition requiring special
attention.
To Next Page
Loading...
