JIGOO C300 - Filter and Cyclone Cleaning Procedure; Brush Roller Maintenance; Cleaning the Brush Roller

Cleaning the Brush Roller
EN
06
c) Take out the pre-motor filter and the sponge as
follows.
Rotate the cyclone counterclockwise to remove the
cyclone.
d) Wash the HEPA filter, the pre-motor filter, the
sponge, and the cyclone.
Note: Please wash the filters at least once a month.
More frequent washing may be required when
vacuuming fine dust or using the machine intensively.
e)Be sure to dry the HEPA filter, the pre-motor filter,
the sponge, and the cyclone completely before the
next use.
f) Put the cyclone, the sponge, and then the
pre-motor filter back into the dust cup.
Rotate the cyclone clockwise to lock it.
g)Assemble the HEPA filter.
Rotate it clockwise to lock the HEPA filter.
a) Disconnect the power supply and press down the
release button for the brush roller as shown below.
b) Pull out the brush roller.
c) Clean the hair and other foreign objects from the
brush roller.
Pre-Motor Filter
Pre-Motor Filter
Sponge
Sponge
Rotate
Cyclone
Remove
Rotate
HEPA Filter
Rotate