Jimmy JV83 Quick Start Guide

Jimmy JV83 Cleaning & Replacing Parts
Assemble the battery pack
Assemble electric floor head with
metal tube
Accessories Assembly
Battery pack assembly: use one hand to
hold handheld vacuum cleaner, one hand to
hold battery pack, align with the guide-track
groove, then install the battery pack until the
“click” sound is heard.Pull hard the battery
pack downwards, if the batter pack remain
tight, which means battery pack assembly
complete.(Picture3)
Hold the floor head with left hand, use right
hand to insert the metal tube vertically into
floor head, align with the conductive needle,
press the tube until a “click” sound is heard.
Attention: Keep the handle and floor head in
the same direction, conductive needle shall
align with the socket.
For ease of use, this product is
specially equipped with accessories
for the hand-held vacuum cleaner.
The handheld can connect to
dierent tools for dierent cleaning
purpose.
This is an important document for Jimmy JV83, keep well. Clients are also required to read their Main Instruction Manual

Jimmy JV83 Specifications

General

Power control	Mechanical
Suction power	135 AW
Operating time	40 min
Variable power	Yes
AC input voltage	25.2 V
Maximum input power	450 W
Number of power levels	3
Annual energy consumption	- kWh
Proper use	Home
Noise level	78 dB
Cleaning surfaces	Bare floor, Carpet, Hard floor, Stair steps, Upholstery
Vacuum air filtering	Air-clean
Dirt separating method	Cyclonic/filtering
Type	-
Cleaning type	Dry
Dust capacity	0.5 L
Product color	Blue
Dust container type	Dust bag
Control type	Buttons
Dust container full indicator	No
Number of dust bags	1 pc(s)
Vacuum brushes included	Carpet brush, Cleaning brush, Hard floor brush, Mini brush, Motorized brush, Universal brush, Dusting brush

Weight and Dimensions

Package depth	289 mm
Package width	700 mm
Package height	186 mm
Package weight	4700 g