To Next PageTo Next PageWhat to do if my Jimmy JV35 Vacuum Cleaner has no power?
If your Jimmy Vacuum Cleaner experiences power failure, first ensure the power cord is firmly inserted into the socket. If it is, check the socket to confirm it has power. Finally, make sure you've pressed the On/Off button to activate the vacuum.
Why does my Jimmy Vacuum Cleaner have low suction power?
If your Jimmy Vacuum Cleaner's suction power is low, the suction port, filter, or cyclone may be clogged. Clean the suction port, filter, and cyclone to resolve this issue.
Why does my Jimmy JV35 Vacuum Cleaner automatically turn off?
Your Jimmy Vacuum Cleaner might automatically turn off for a few reasons. The dust cup could be full; in this case, clean the dust cup and filter, unplug the power cord, and wait two hours before reusing. Also, a clogged suction port or blocked filter could be the cause.
How to fix a UV tube failure on my Jimmy JV35 Vacuum Cleaner?
If the UV tube on your Jimmy Vacuum Cleaner isn't working, remember that the UV function only operates when it's less than 5CM from the object. Try moving the machine forward and backward, and ensure the machine is tilted no more than 30 degrees. Also, clean the sensor window with a half-dry cloth. If the UV light is damaged, contact after-sale service.
What to do if Jimmy JV35 Vacuum Cleaner brushroll fails?
If your Jimmy Vacuum Cleaner's brushroll fails, it might be tangled with foreign matter. Remove the cover and clean the brushroll according to the user guide. Also, the belt might be broken. Remove the cover according to the user guide and check the belt. If it's broken, contact after-sale service for repair.
General| Power | 700W |
|---|---|
| Dust Cup Capacity | 0.5L |
| Cord Length | 5m |
| Cordless | No |
| Dust Collection Type | Bagless |
| Rated Voltage | 220-240V |
| Model | JV35 |
| Category | Vacuum Cleaner |
| Dust Capacity | 0.5L |
| Filter Type | HEPA |
| Type | Handheld |
| Suction Power | 20 kPa |
Process of opening the package and preparing the machine.
Identification of all components and parts of the vacuum cleaner.
The default operating mode when the vacuum cleaner is turned on.
Mode activated by a single press of the mode button.
Mode selected by pressing the mode button again.
Detailed steps for cleaning the dust cup and its components.
Instructions on how to remove and clean the brushroll assembly.
Guidelines for regular cleaning of dust cup, filter, and UV tube.
Recommendations for storing the machine in a safe environment.
Schematic representation of the product's electrical components and connections.
