To Next PageTo Next Page
Need help?Do you have a question about the JIMTEN Ciclon T-503 and is the answer not in the manual?
How to connect the outlet pipe and non-return valve.
Install an aeration valve on the outlet pipe to prevent water siphoning.
How to connect lateral inlets using nuts and conical joints.
Placement of the waste disposer unit for proper ventilation and accessibility.
Types of sanitary appliances that can be connected to the unit.
Ensure unit is accessible, has adequate motor ventilation, and complies with regulations.
Unit operates automatically with water flow; avoid certain waste types.
Can pump hot water but not corrosive liquids, oils, or paints.
Recommendations for long-term isolation and frost protection.
Use acid-free cleaners; vinegar recommended for lime deposit.
Guide to diagnosing and solving issues like unit not starting or slow discharge.
Product designation and compliance with EU directives.
Details on warranty activation, repair/replacement, and exclusions.
Contact details for technical support and warranty certificate submission.
Fields for user, supplier details and connected fixtures.
General| Model | Ciclon T-503 |
|---|---|
| Type | Continuous Feed |
| Voltage | 220-240V |
| Frequency | 50 Hz |
| Speed | 2800 RPM |
| Grinding System | Stainless Steel Grinding Components |
| Grinding Chamber Capacity | 1200 ml |
| Motor Type | Induction Motor |
| Grinding Technology | MultiGrind Technology |
| Overload Protection | Yes |
| Mounting Type | Quick Lock Mounting System |
