Once the soft box is firmly assembled it can be placed onto the monolight.
DO NOT TRY TO ASSEMBLE
SOFTBOX TO MONOLIGHT ON A
STAND.
Please be careful in attaching the soft
box to the monolight. Remember it is a
bayonet mount that requires a slight twist
.Carefully align the lugs on the softbox
with the slots on the monolight so as to
NOT break the expensive flashtube.
You will hear a soft click when the two
pieces are correctly connected.
Push the release button to remove.
When you have placed your lights in the correct position for photography please ensure
that you use the weighted bags to stabilise the lights.
This is important as the assembly is top heavy and naturally unstable.
Fit the bags over the support struts of the light stands. We have ample bags so please
use them for safety.
Our softboxes each have two diffusers.
The inner diffuser is attached using the
Velcro tabs as illustrated in the image at
left. Use of a diffuser is optional.
The diffusers are the thin pieces of
translucent material packed with the
softboxes.
There is an inner and an outer diffuser with
each soft box.
Page 10 of 26
To Next Page
