The inner diffusers have tabs as per our image above.
The outer diffusers do not have tabs but continuous Velcro around the edges which
attaches to the Velcro edges of the softboxes.
Here’s a hint for fitting the diffusers.
Start at the top of the soft box unless
you like making things difficult for
yourself.
It is easiest to attach diffuser once the
softbox and monolight are attached to
the stand.
Once fitted, the inner diffuser should look like
our image at left.
The tabs do not have to pulled tight, nor do you
have to engage all the Velcro on each tab.
The front diffuser attaches using the Velcro edge of
the soft box.
The diffusers are delicate so please be careful
handling them.
Page 11 of 26
To Next Page
