When you attach a monolight to the stand
please ensure that the brass attachment at
the top of the stand is completely hidden from
view (apart from the knurled section at the
very bottom).
You may need to ‘jiggle’ the head into position
or undo the locking screw on the monolight a
little more to achieve this.
Once you have the head placed on the stand
properly ensure that you have tightened the
small locking nut on the monolight to prevent
the light crashing to the floor and you having
to pay for the repairs.
Once attached, the monolight should hide the
bulk of the brass attachment of the stand as
per our picture at left.
If it doesn’t, you haven’t fitted it properly.
If you are planning to use a
soft box/umbrella please fit the
monolight to the soft
box/umbrella before attaching
to the stand.
Snoots are OK to fit once the
monolight is on the stand.
Page 6 of 26
To Next Page
Loading...
