What to do if factory default settings have been reset on Jindara Derwent High Efficiency Gas Log Fire Gas Heater?
If the factory default settings on your Jindara Gas Heater have been reset, you will need to reprogram the thermostat. Refer to page 16 for the initial setup and page 18 for instructions on programming the automatic mode.
How to fix Jindara Derwent High Efficiency Gas Log Fire Gas Heater coming on at the wrong time?
To resolve this issue, check that the programmed period start and finish times are correct. Also, verify that AM or PM is correctly set on your Jindara Gas Heater.
Why is my Jindara Derwent High Efficiency Gas Log Fire coming on at the wrong temperature?
To correct this, ensure the programmed period temperature setting is correct. Also, check that °C or °F is correctly specified on your Jindara Gas Heater.
How to correct the time or day of the week on Jindara Derwent High Efficiency Gas Log Fire Gas Heater?
You should reset the time and day of the week as you did during the initial setup of your Jindara Gas Heater.
Details safety warnings and provides information from the appliance's name plate.
Lists the key product features and specific safety features of the appliance.
Covers the overall process and specific methods for installing the heater.
Provides a general overview and sequence for heater installation.
Step-by-step instructions for safely removing the appliance's door assembly.
Guidance on how to carefully install the logset components.
Specifies required minimum clearances around the appliance for safe installation.
Instructions for building a false fireplace structure for installation.
Detailed steps for connecting and installing the vertical flue system.
Instructions for installing the horizontal flue system through a wall.
Specific guidance for horizontal flue installation on stump floors.
Steps for installing the unit within a prepared false fireplace structure.
Covers pre-operation checks, manual operation, and on/off procedures.
Essential checks to perform before powering on and operating the heater.
Explains how to operate the heater using manual controls and modes.
Procedures for turning the heater on and off in manual mode.
Comprehensive guide to the RF thermostat's features, operation, and programming.
Overview of the RF thermostat's key features and capabilities.
Explanation of symbols, icons, and data shown on the thermostat's LCD screen.
Details the function of each button on the RF thermostat.
Step-by-step guide for setting up the thermostat for the first time.
Instructions for operating the thermostat and heater in manual mode.
How the thermostat controls the heater based on programmed schedules.
Detailed guide to programming daily temperature and time periods.
Visual examples of the thermostat's programming interface screens.
Information on changing temperature units and restoring factory defaults.
Procedure for pairing the RF thermostat with the heater's receiver unit.
Explanation of the receiver/controller unit and its interface.
Notes on safety features and communication protocols for the thermostat.
A summary of common thermostat functions and their corresponding actions.
Common issues with the thermostat and their solutions.
Important safety points and general advice for using the appliance.
Recommendations for routine maintenance and cleaning of the heater.
Procedures for servicing and maintaining the appliance's components.
Steps for accessing internal components by removing panels and the fan.
Instructions for replacing the gas injectors for different gas types.
Guidance on how to adjust the gas pressure settings.
Steps to remove the component tray for service access.
Addresses common problems encountered with the appliance and provides solutions.
Troubleshooting steps for when the appliance fails to ignite.
Solutions for issues like unit not operating on low or fan problems.
Diagnosing problems related to the fan and unit overheating.
Addressing excessive carbon buildup and flame behavior problems.
Resolving issues with insufficient heating or unexpected shutdowns.
An electrical schematic illustrating component connections and wiring.
Provides detailed physical dimensions and diagrams of the appliance.
A comprehensive list of available replacement parts and their identifiers.
Details the individual parts that make up the complete log set.
Outlines the terms, conditions, and duration of the product warranty.
A checklist for installers to follow during the initial setup and commissioning.
General| Type | Gas Log Fire |
|---|---|
| Fuel Type | Natural Gas (NG) / LPG |
| Efficiency (NG) | 85% |
| Efficiency (LPG) | 85% |
| Efficiency | 85% |
To Next Page