Need help?Do you have a question about the JinkoSolar JKM350PP-72-DV and is the answer not in the manual?
Provides a general introduction to the Jinko Solar PV modules and the importance of following installation instructions.
Lists the specific series of Jinko Solar PV modules that this manual covers, defining the scope.
Highlights critical safety warnings and potential hazards associated with PV modules and their installation.
Details essential safety precautions and personal protective equipment required during PV module installation.
Specifies environmental conditions (temperature, water immersion) and site selection criteria for PV module installation.
Introduces methods and components for mechanically mounting the PV modules.
Guides on visually inspecting modules for defects like broken glass or corrosion.
Provides instructions on how to clean PV modules safely and effectively.
Recommends preventive maintenance for connectors and cables every six months.
General| Model | JKM350PP-72-DV |
|---|---|
| Manufacturer | JinkoSolar |
| Type | Monocrystalline |
| Maximum Power (Pmax) | 350 W |
| Temperature Coefficient of Voc | -0.29%/°C |
| Temperature Coefficient of Isc | +0.05%/°C |
| Maximum Series Fuse Rating | 20 A |
| Frame | Anodized aluminum alloy |
| Connector | MC4 Compatible |
| Dimensions | 1956x992x40mm |
| Operating Temperature | -40°C ~ +85°C |
| Warranty | 10 years product warranty, 25 years linear power output warranty |
| Maximum System Voltage | 1000V DC |
| Number of Cells | 72 |
| Front Glass | 3.2mm tempered glass, anti-reflective coating |
| Junction Box | IP67 |
To Next Page