FAQs
7
What is the gray pushbutton
on THAT-2 used for?
The button is used to select which
audio signal will be sent into the
telephone.
Out: Handset Audio
In: Line Input
Keep in mind that you cannot send
audio into the Line Input XLR/RCA
jack and talk on the handset at the
same time. However, any audio sent
into the phone can be heard on the
handset and is available on the
XLR/RCA From Phone output jack at
all times.
I have everything connected
correctly. Why can’t the caller
hear me?
You cannot use the speakerphone
function on your telephone during your
recording. THAT-2 accesses the audio
through the handset cord. With the
speakerphone turned on, there is no
audio going through the handset.
We're using THAT-2 to get
caller audio to broadcast on
our call in radio show. How do
we get better sound quality?
THAT-2 was designed for only record
and play applications. For better
sound quality you should consider
getting an Innkeeper digital hybrid.
FAQs
To Next Page
Loading...
Need help?
General