Setup
3
Setup
Getting Connected
THAT-2 connects between the handset and the base of your telephone. Follow
these simple steps:
1. Unplug the modular handset cord from your telephone base.
2. Using the black handset jumper cord that we have provided, connect the
Telephone jack of THAT-2 to the handset jack on your telephone base.
3. Plug your handset cord, and handset, into the Handset jack on THAT-2.
4. Connect your audio equipment to the line input and output jacks on THAT-2.
Note: Not for use with telephones that have a keypad in the handset.
To Next Page
Loading...
Need help?
General