JL Audio FIX 82 - Specifications

Specifications
Electrical Specications
Power Supply Type Regulated DC-DC SMPS
Operating Voltage 10 – 16V DC
Standby Mode Current Draw < 1.5 mA
Operating Current Draw 0.7 A at 13.8V
Recommended Fuse Value 1 A
Recommended Fuse Type Fast-Acting, ATO/ATC or similar
OEM Input Section
Number of Input Channels Eight
Input Type Dierential-Balanced
Input Range 250 mV – 30V RMS
Input Level Setting Fully Automatic
Input “Signal Present”
Threshold
10 mV RMS
Digital Specications
Processor Intersil® D2Audio DAE-6
Bit Depth / Sample Rate 24 bit / 48 kHz
Number of EQ Bands 30 x 2 channels
EQ Resolution 1/3 octave (25Hz – 20kHz)
Output Section
Number of Output Channels Two
Output Type
Unbalanced, via RCA Jacks
Optical digital (S/PDIF)
Maximum Output Voltage 4V RMS
Output Impedance 450 ohms
Signal to Noise Ratio 96dB (A-Weighted, referred to 4V RMS output)
THD + Noise 0.02% at rated output (20Hz – 20kHz)
Dimensions
L x W x H 5.19 in. x 4.29 in. x 1.85 in. (132 mm x 109 mm x 47 mm)