JLab JBUDS WORK User Manual

CAUTIONS
• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.
JLAB.COM
Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool
CHARGING
Connect to computer or USB 5v 1A (or less) output device.
Note: JBuds Work can simultaneously charge while
Bluetooth is connected.
AUX INPUT
JBuds Work can be used as a wired headset with AUX cable.
Note: The headset will still use a limited amount of battery for the
microphones to function.
OR
CHARGING

JLab JBUDS WORK Specifications

General

Headset type	Binaural
Product type	Headset
Product color	Black
Wearing style	Head-band
Recommended usage	Office/Call center
Bluetooth	Yes
Wireless range	10 m
Bluetooth version	5.0
Bluetooth profiles	A2DP, AAC, AVRCP, HFP, HSP, SBC
Connectivity technology	Wireless
Impedance	32 Ω
Driver type	Dynamic
Driver unit	40 mm
Magnet type	Neodymium
Ear coupling	Supraaural
Headphone frequency	20 - 20000 Hz
Intraaural headphones type	Earbuds
Microphone type	Boom
Microphone sensitivity	-42 dB
Battery type	Built-in battery
Standby time	600 h
Battery capacity	600 mAh
Battery recharge time	3 h
Input voltage (earpieces)	5 V
Continuous audio playback time	60 h
Quantity	1
Cables included	3.5 mm to USB Type-C, USB Type-C

Weight and Dimensions

Weight	170 g