11
STEP 5
Screw the console to the vertical frame bar. Use 2x
black Allen head bolts, 1x black arc washer and 1x
black flat washer for each side.
STEP 6
To level the treadmill, adjust the rubber feet at the
base if required. Twist the rubber foot clockwise to
lower the treadmill or twist anti-clockwise to raise it.
STEP 7
Remove the screw and washers that are attaching
the security lock to the base.
STEP 8
Plug the treadmill into the wall outlet to power on
the treadmill.
NOTE: You’ll need to insert the safety key in order
to operate the treadmill.
• It is recommended that at least two people lift, move and assemble the treadmill.
• Use safe lifting methods.
WARNING: HEAVY EQUIPMENT
NOTE: The fuse and jagged washers you have received with your treadmill are spare
parts and are not needed during assembly.