Quick Start Guide

VERSO Series

VERSO 12

VERSO 15

Quick Start Guide - JLTVERSO, 201212v1

JLT Mobile Computers AB

Head oce: Isbjörnsvägen 3, SE-352 45 Växjö, SWEDEN

Sales Oce: Medborgarplatsen 3, Plan 8, SE-118 26 Stockholm, SWEDEN

Phone: +46 470 53 03 00 Fax: +46 470 445 29 Email: info@jltmobile.com

www.jltmobile.com

JLT provided Mounting Kits: RAM®

RAM® Mount -> Computer: Use included screws and washers.

RAM® Mount + “JLT Communication Box” -> Computer: Use included screws and

washers.

Usage of thread locking products like Loctite® is recommended.

Mounting with other brands

When mounting a JLT unit to a VESA bracket, use M6 screws with correct length.

The inserting part of the screw should be minimum 5mm and must NOT exceed

6.5mm.(That is 5 complete turns on the screw).

If screws are too long, build up with washers to adjust the inserting part of screw.

If this is not done and the screws are too long, they will deform the aluminum case

inwardly when applying great force.

Torque: Maximum 6Nm

Mounting

Supplied within the computers box are also

• Cable Strain Relief (Use Torx T10 / T20 screwdriver)

• Rubber Sealing Plugs – for all unused ports.

For additional sealing of your JLT units, we oer the Roxtec Sealing KIT. Please contact

your JLT Sales representative for more information about the Roxtec Sealing KIT or

visit www.jltmobile.com

IP65 med Cable strain relief

IP67 med Roxtec

Sprängskisser

JLT VERSO 12 - User Manual

Other manuals for JLT VERSO 12