Accessories
This list will help you chose the main additional items needed to finish your PC21.
1. Servos 7 high quality Servos all the main control surfaces require a minimum of
15 kg torque
2. Aluminum servo horns or CFK . I use the one from Gabriel-stahlformenbau.de
7 x 992904 Servohorn
7 x CFK Horn 5/20 992710 with 3 mm ballink
1. A receiver power supply such a Powerbox Evolution or Cockpit
2. Turboprop such as Kingtech K45/60 or SPT5 Jetcat
There will be a set of 3D printed parts available such as Linkage fairing, Connector
holder, Tube guiding, scale parts. Please contact your dealer regarding order.
Did you read the hints and warnings above and the instruction carefully? Did you
understood everything in this manual completely ?
Then and only then, let’s start assembling your JMB PC 21, If not please read it again
before you continue.
4Ver. 1.0 28.03.2019 Written by F.W
To Next Page
Loading...