How to Glue the Plastic Hinge in
My Personal favorite
are the UHU Endfest 300,
I do not recommend to use
any 5 min Epoxi for this work step.
Fill the Hole on one side with the
mixed glue, you can use a Siring
or just a small Wood to fill it up a bit,
if the glue goes around 5mm in to the
hole is enough.
Apply on the Plastic hinge until half
way around also Glue and push the hinge in .
5Ver. 1.0 28.03.2019 Written by F.W
To Next Page
Loading...