6
Hanging Snap Screen
®
Care
DO NOT use any harsh chemicals to clean
your Snap Screen
®
.
CLEAN your Snap Screen
®
using a clean
cloth and warm soapy water, and allow to
air dry.
This product is unconditionally guaranteed for one year against all defects of workmanship
and materials. This guarantee does not affect your statutory rights. If you have any problems
or queries about this product please contact JML.
JML Customer Helpline: 0800 781 7831
Guarantee
1. Ensure you position the Snap Screen
®
high
enough so the bottom does not drag on
the floor.
2. Take the left Snap Screen
®
panel and
remove the other side of the white backing
from the top 3 fibre fix strips, A, B and C.
3. Align strip A (see diagram) next to the
centre of the door frame and stick into
position, by applying plenty of pressure
ensuring it is high enough not to drag on
the floor.
4. Stretch the Snap Screen
®
across the top
of the door frame and stick strips B and C
into place.
DO NOT put your Snap Screen
®
in the
washing machine or dry in a tumble dryer.
5. When you are happy the Snap Screen
®
is
in the correct position, and at the correct
height, remove the white backing from
the fibre fix strips 1, 2 and 3 and stick into
place down the side of the door frame by
applying plenty of pressure.
6. Repeat the process, from point 2, for the
right Snap Screen
®
panel, ensuring that the
Snap Screen
®
magnets are able to snap
closed.
NOTE - If the Snap Screen
®
panels do not
snap together it may be necessary to adjust
the distance between the panels.
To Next Page
Loading...