3 Once function, time and preset
(optional) have been set:
Press the ‘Start’ button, and cooking will
begin immediately, unless a ‘preset’ time
has been set.
Example of setting the functions
Reheat and Boil functions:
Note: The ‘Preset’ function is not available in either the Reheat or Boil functions.
1. Press ‘Menu/On’ button and select the ‘Reheat’ or ‘Boil’ function using the
‘Up’ or ‘Down’
buttons (
).
The display will show the minimum time setting available (see minimum & maximum
cooking times on page 13).
2. To change the time setting, press the ‘Timer’ button (the time will flash) then adjust the
time, pressing the ‘Down’ button (
).
Optional Preset function -
To set the finish cooking time:
Set the time you want the cooking
to finish by pressing the ‘Preset’ button.
The time will flash, displaying the last
‘preset’ time that was set.
To change the time, press the ‘Up’ button
to set the required hour and the ‘Down’
button to set the required minute.
Follow the remaining step.
Temporary memory function:
If the power to the Star Chef Deluxe is off for up to 30 minutes during cooking, cooking will
resume once the power comes back on.
If the power is off longer than 30 minutes, the Star Chef Deluxe will go into standby mode
when the power comes back on.
10
To Next Page
Loading...
Need help?
General