Need help?Do you have a question about the jobmate JMPGB150G and is the answer not in the manual?
General safety precautions to reduce risks of fire, electric shock, and personal injury when using electric tools.
Key safety practices for operating the tool, including work area, attire, and tool handling.
Specific safety rules for using grinding wheels, including inspection, speed, adjustments, securing, and maintenance.
Explanation of key symbols used in the manual, indicating warnings, protective equipment, and maintenance actions.
Specifies the intended applications for the bench grinder, such as cutting grooves in wood materials.
Guidance for fitting shields, arresters, and adjusting work rests for safe operation.
Procedures for securely mounting the grinder, plugging it in, and switching it on and off for operation.
Checks for power supply, connections, and fuses when the grinder fails to operate.
Diagnosing and resolving issues related to wheel wobbling, including lock-nut tightness and wheel damage.
Addressing poor surface finish by checking pressure and wheel clogging, with no user-serviceable parts.
General safety precautions to reduce risks of fire, electric shock, and personal injury when using electric tools.
Key safety practices for operating the tool, including work area, attire, and tool handling.
Specific safety rules for using grinding wheels, including inspection, speed, adjustments, securing, and maintenance.
Explanation of key symbols used in the manual, indicating warnings, protective equipment, and maintenance actions.
Specifies the intended applications for the bench grinder, such as cutting grooves in wood materials.
Guidance for fitting shields, arresters, and adjusting work rests for safe operation.
Procedures for securely mounting the grinder, plugging it in, and switching it on and off for operation.
Checks for power supply, connections, and fuses when the grinder fails to operate.
Diagnosing and resolving issues related to wheel wobbling, including lock-nut tightness and wheel damage.
Addressing poor surface finish by checking pressure and wheel clogging, with no user-serviceable parts.
General| Type | Angle Grinder |
|---|---|
| Wheel Diameter | 150 mm |
| Speed | 11000 rpm |
| No-load speed | 11000 rpm |
| Disc diameter | 150 mm |
To Next Page
