EasyManua.ls Logo

JOBO AutoLab ATL 2200 User Manual

JOBO AutoLab ATL 2200
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Wir stellen vor: Die JOBO ATL's 2200 / 2300 / 2400 / 2500
JOBO - das heißt über 60 Jahre Erfahrung in Papier- und Filmentwicklungstechnologie.
Die Autolabs ATL-2200/2300/2400/2500 sind die neusten freiprogrammierbaren, voll- automatischen Entwicklungsgeräte in
der JOBO ATL Palette. Bei der großen Vielfalt von verfügbaren Tanks und Trommeln ist das Autolab bestens für Arbeiten
verschiedenster Größenordnungen geeignet. Da es vollkommen bedienerprogrammierbar ist, können Sie Entwicklungszeiten und
-temperaturen für verschiedene Prozesse einspeichern und innerhalb von wenigen Minuten entwicklungsbereit haben.
Alle für die fotografische Entwicklung notwendigen Funktionen, außer der Stabilisierung und Trocknung, sind beim ATL
vollautomatisch.
Die Temperaturregelung des Wassermantelbades arbeitet auf 1/10 Grad genau.
Sowohl die Flaschen mit den zu verarbeitenden Chemikalien als auch die rotierende Trommel werden durch das Wassermantelbad
auf Prozeßtemperatur gehalten.
Die Rotationsbewegung sowie der Drehrichtungswechsel werden durch den Mikroprocessor gesteuert. Temperierte Chemikalien
werden mittels eines Druckluftsystems von den
Vorratsbehältern in die Entwicklungstrommel gepumpt. Der eingebaute Computer zeigt, welche Menge an Chemikalien in den
Vorratsbehältern verblieben ist. Folglich läßt Ihr ATL das Starten eines Prozesses nicht zu, wenn nicht genügend Chemikalien
vorrätig sind. Der Mikroprocessor steuert ebenfalls den Zeitablauf jedes Entwicklungs- und Wässerungsschrittes. Außerdem
ermöglicht Ihnen das ATL die Rückgewinnung jeder verbrauchten Lösung, da sämtliche Chemikalien getrennt aufgefangen
werden. Die Rückgewinnung und Wiederaufbereitung verbrauchter Chemikalien macht die Entwicklung mit Ihrem ATL noch
wirtschaftlicher, bzw. ermöglicht eine umweltgerechte, preiswerte Entsorgung.
MERKMALE:
QUALITÄT
· Vollautomatisch durch Mikroprozessorsteuerung
· Konstante Ergebnisse von Prozeß zu Prozeß
· Jeder Prozeßschritt auf die Sekunde genau
WIRTSCHAFTLICHKEIT
· Gute Ausnutzung der Chemikalien
· Automatische Temperaturkontrolle des gesamten Systems
· Eingebaute Chemikalienauffangvorrichtung
VIELSEITIGKEIT
· Direktes Wechseln zwischen verschiedenen Prozessen
· Alle Prozesse sind möglich: z.B. C-41, E-6, Ciba/TM, S/W, R-3, RA-4, Litho, Röntgen
· Jedes Format: z.B. Rollfilm, Kleinbild, Planfilm von 6x9 bis 21x30 cm,
größere Formate auf Anfrage
· Papiergrößen von 7x10 bis 50x60
Wir fertigen Sonderanfertigungen nach Ihren Vorgaben für Filmformate bis 50x60cm, sowie Spiralen für Filmlängen bis 8
Meter und bis 127 mm Breite.
The JOBO ATL's 2200 / 2300 / 2400 / 2500
The AutoLabs ATL 2200/2300/2400 and 2500 are the newest user-programmable, fully automatic developing processors in the
JOBO product line. With the very many tanks and drums available, the Autolab is perfectly suited for a variety of processing
needs. The unit is completely user-programmable, enabling you to programme developing times and temperatures for different
processes, whereby the unit is ready for developing operations within a few minutes.
All functions needed for photographical development, except for stabilizing and drying, are fully automatic in the ATL. The
temperature control system of the water jacket reacts to deviations of 1/10th of a degree. The bottles with the solutions to be
processed as well as the rotating drum are kept at process temperature by the water jacket. The rotary movement is controlled by
the microprocessor. Pre-warmed solutions are pumped from the supply containers into the developing drum by means of a
compressed air system. The built-in computer shows how much solution is left in the storage containers. Consequently, your ATL
will not permit the starting of a process if there is not enough solution. The microprocessor also controls the timing of each
developing and rinsing step. Besides, the ATL permits you the recovery of each used solution, because all chemicals are collected
separately. The recovery and reprocessing of used chemicals makes processing with your ATL even more profitable and permits
a non-polluting, economically priced waste disposal.
FEATURES:
QUALITY
· Fully automatic processing using a sophisticated microprocessor control system
· Consistent results run to run and day to day
· Each process step is accurate to the second
ECONOMIC EFFICIENCY
· Thorough use of chemicals
· Intelligently designed heating system to lower your electric bill
· Chemical recovery for silver reclamation
FLEXIBILITY
· Quickly and easily switch from one process to another
· All common processes are handled: e.g. C-41, E-6, Ciba/TM, B/W, Ilfochrome (Ciba), R 3, RA-4, lithographic, x-ray
· Any format: e.g. roll film, miniature film, sheet film from 6x9 to 21x30 cm, larger formats available on request
· Paper formats from 7x10 to 50x60
We are able to produce special units in accordance with your specifications for film formats up to 50x60 cm, and spirals for
film lengths up to 8 metres and up to 127 mm in width.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the JOBO AutoLab ATL 2200 and is the answer not in the manual?

JOBO AutoLab ATL 2200 Specifications

General IconGeneral
BrandJOBO
ModelAutoLab ATL 2200
CategoryComputer Hardware
LanguageEnglish

Summary

3. PREPARING FOR INSTALLATION

3.2 Electrical needs

Requirements and recommendations for connecting the processor to a power source.

3.3 Water pressure

Specifies the required water pressure range for optimal processor operation.

3.4 Water temperature

Details on water connections and temperature requirements for the processor.

4. INSTALLATION INSTRUCTIONS

4.6 Electrical connection

Critical safety information and procedures for the electrical connection of the processor.

5. PREPARING TO PROCESS

5.2 Filling the water-bath

Procedure for filling the processor's water-jacket bath with water.

5.3 Setting the tempered water supply

How to adjust the water supply to the correct temperature for processing.

5.4 Filling the chemical bottles

Instructions on accurately filling the chemical bottles for processing.

6. PROGRAMMING

6.1.1 SET mode

How to enter and use the SET mode for programming changes.

6.2 Programming

General introduction to the programming functions available on the processor.

6.2.1 Altering process data

Detailed steps for modifying existing process parameters like temperature and times.

6.2.6 Setting the rinse water temperature

Procedure for setting and adjusting the rinse water temperature accurately.

7. STARTING A PROCESS

7.1 Selecting the correct process

Steps to choose and set up the desired processing program.

7.2 Selecting the chemical volume needed

How to specify the exact quantity of chemicals required for the selected process.

7.3 Selecting the rotation speed

Setting the appropriate rotational speed for the drum during processing.

7.5 Final check list

A checklist to verify all critical parameters before starting a process.

7.6 Starting a process

Procedure for initiating a selected process after all checks are complete.

7.7 At the end of the process

What happens when a process concludes, including alarms and error handling.

8. SPECIAL FUNCTIONS

8.2 Overriding the temperature check

Method to bypass temperature checks and force start a process.

8.3 Automatic Temperature Compensation (ATC)

Features and operation of the Automatic Temperature Compensation system.

9. TROUBLESHOOTING

11. CLEANING AND MAINTENANCE

11.2 The Cleaning programmes

How to use the dedicated cleaning programs for bottles and lines.

11.4 Cleaning the processor

Routine cleaning procedures for the processor's exterior and internal components.

12. AFTER-SALES SERVICE

Related product manuals