To Next PageTo Next Page
Need help?Do you have a question about the JOBO AutoLab ATL 2500 and is the answer not in the manual?
General| Brand | JOBO |
|---|---|
| Model | AutoLab ATL 2500 |
| Category | Computer Hardware |
| Language | English |
Guide to unpacking the processor and removing packaging materials safely.
Instructions on checking for and reporting concealed shipping damage to the processor.
Importance of retaining original packaging for potential service or repairs.
Guidelines for selecting an appropriate installation location for the processor.
Requirements for the electrical power supply and connection for the processor.
Specifications for required water pressure for optimal processor operation.
Details on water temperature requirements for the processor's functions.
Information on the processor's drainage requirements and connections.
Guidance on the ideal ambient room temperature for processor performance.
Explanation of how the processor collects and handles used chemicals.
Instructions on connecting the processor's drain outlets for waste water.
Guidance on connecting the processor to the main drinking water supply.
Steps for connecting the refill lines for chemical bottles.
Instructions on connecting the processor's rinse water supply lines.
Detailed instructions and safety precautions for electrical connection.
A checklist to verify all installation steps before initial operation.
Initial steps to prepare the processor before starting a process.
Procedure for filling the processor's water-jacket bath.
Steps to adjust the tempered water supply temperature for processing.
Instructions for accurately filling the chemical storage bottles.
Guide to filling the rear bottles used for pre-tempering.
How to set the tank system plug for proper operation.
Adjusting the roller supports to match different tank and drum systems.
How the automatic cooling system maintains process temperature.
Procedures for collecting and managing used chemicals.
Overview of the processor's programming capabilities and default settings.
How to enter and use the SET mode for programming changes.
How to modify process parameters like name, temperature, and times.
Manual control of the processor's lift arm for specific operations.
Information on the heat exchanger's role in rapid temperature adjustment.
How to enable and use the automatic chemical refilling feature.
Utilizing the rinsing option to prevent film drying in the spiral.
Adjusting the temperature of the rinse water for optimal results.
Accelerating temperature adjustment for chemicals at lower temperatures.
Reserved for authorized service technicians; details are not provided.
Setting the standby temperature for the processor.
Procedure for changing the security code to access programming.
How to select the display language for the processor.
Adjusting the brightness level of the LCD panel display.
Configuring the appearance or behavior of the cursor on the display.
How to view a list of errors that occurred during the last process.
How to cancel or abort a running process.
Guide to selecting the appropriate processing program on the processor.
How to select the correct quantity of chemicals required for a process.
Setting the correct rotation speed for the drum during processing.
Inputting the current chemical volume in bottles for accurate tracking.
A comprehensive checklist to ensure readiness before starting a process.
The procedure for initiating a processing cycle on the unit.
Displaying current water bath and chemical temperatures during operation.
How to bypass temperature checks and force start a process.
Understanding what Automatic Temperature Compensation (ATC) is.
Instructions for installing the bottle rack for B/W solutions.
Selecting program and background temperature for ATC.
Understanding the temperature ranges and error messages for ATC.
Steps necessary to carry out a developing process and manufacturer instructions.
Handling E-6 processing, including color variations and special controls.
Adapting manufacturer developing times for JOBO rotation process.
Automatic cleaning of the internal chemical supply system at process end.
Programmes for cleaning supply bottles and chemical tubes.
Instructions for lubricating the processor's gear wheels and rollers.
Daily and monthly cleaning procedures for the processor's exterior and interior.
Information on wear and replacement of drive gears for the processor.
Methods for preventing algae growth in the water bath.
Procedure for safely removing and replacing supply bottles.
Steps for preparing the unit for extended periods of non-use.
Precautionary measures when storing the processor in sub-freezing temperatures.
Information regarding calculated filling levels and acceptable deviations.
Instructions for cleaning the processor's air filter.
Information to gather before contacting customer support for service.
