Joby SeaPal 6" Dome - User Manual

Instruction manual
SeaPal 6” Dome

Summary

Product Overview and Contents

Overview

Introduces the SeaPal Dome, highlighting its use for smartphone photography and capturing underwater and split-level images.

Whats in the box

Lists the included items: SeaPal 6" Dome and Silicon O-Ring for the product package.

Product Nomenclature

Component Identification

Identifies key parts of the SeaPal Dome, including the optically correct element and thread.

Setup and Usage Guidelines

Initial Setup Steps

Instructions for initial setup, including cleaning the dome, hand-tightening, and removing protective film.

Safety Information

Crucial safety warnings regarding depth limits and temperature exposure for the SeaPal Dome.

Underwater Usage

Guidance on using the SeaPal Dome underwater, emphasizing adherence to initial setup instructions.

Maintenance and Repair

Procedures for cleaning and storing the SeaPal Dome after each use to ensure longevity.

Warranty and Liability

Details on product warranty, limitations, and exclusions for damage or misuse.

After Sales Service

Service Contact Information

Provides contact details for after-sales service, including website and company address.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Safety Information
6. Warranty and Liability
7. Servicing

The JOBY SeaPal 6" Dome is an accessory designed to enhance smartphone photography, particularly for underwater and over/under images. It is a 6-inch acrylic dome that connects to a JOBY SeaPal Waterproof Case, allowing users to capture clear underwater images and popular over/under style images that show both above and below the water's surface simultaneously.

Function Description:

The primary function of the SeaPal 6" Dome is to provide an optically correct element for underwater photography with a smartphone housed in a JOBY SeaPal Waterproof Case. By creating a dome shape in front of the phone's camera, it corrects for the refractive index difference between water and air, which typically causes distortion and magnification when shooting underwater with a flat port. This correction results in sharper, clearer images underwater and enables the unique split-level "over/under" shots where the waterline bisects the frame. The dome is designed to be hand-tightened onto the SeaPal Waterproof Case, ensuring a secure and sealed connection.

Important Technical Specifications:

• Dome Size: 6 inches
• Material: Acrylic
• Depth Rating: Do not exceed depths of 10m/33ft. This is a critical limitation for safe operation and to prevent damage to the dome and the connected waterproof case.
• Temperature Rating: Do not expose the gear to temperatures greater than 50°C (125°F). Extreme temperatures can affect the integrity of the materials and seals.
• Compatibility: Specifically designed to connect to the JOBY SeaPal Waterproof Case.

Usage Features:

• Initial Setup:
  • Ensure the front element of the JOBY Dome is clean, both inside and out, to prevent image quality degradation.
  • Screw on the Dome hand-tight.
  • Remove any front protective film from the Dome before use.
  • For proper sealing, align the two vertical marks on the dome and the SeaPal Waterproof Case. This alignment is crucial for maintaining the waterproof integrity.
• Underwater Use:
  • Prior to taking the SeaPal Dome underwater, users must carefully follow all initial setup instructions to ensure optimal performance and prevent water ingress.
• Travel Considerations:
  • It is explicitly stated not to travel by air with the Dome installed on the JOBY SeaPal Waterproof Case. This suggests potential issues with pressure changes during flight that could affect the seal or components.

Maintenance Features:

• Post-Use Care: After each use and before detaching it from the SeaPal Waterproof Case, the dome should be thoroughly rinsed in fresh water. This helps remove salt, chlorine, and other residues that could damage the acrylic or seals over time.
• Drying: After rinsing, the dome should be dried thoroughly before storage.
• Storage: Store the SeaPal Dome in a dry, cool area to preserve its materials and extend its lifespan.

Safety Information:

• Adherence to the maximum depth rating (10m/33ft) is paramount to prevent damage and potential failure of the waterproof seal.
• Avoid exposing the equipment to high temperatures (above 50°C/125°F) to prevent material degradation.

Warranty and Liability:

JOBY products, including the SeaPal 6" Dome, are warranted to be fit for their designed purpose and free from defects in materials and workmanship. However, the guarantee does not cover subsequent damage or misuse. Given that JOBY SeaPal products are often used in extreme and volatile environments, the warranty explicitly states that loss or damage of equipment, loss of income, reputation, other financial expenses, or personal injury are not covered. The validity period of the Standard Limited Warranty is determined by the law in force in the country, state, or region of purchase, and proof of purchase (receipt) is required for warranty claims.

Servicing:

For after-sales service, customers are directed to www.joby.com. The manufacturer is Videndum Media Solutions Spa, located in Cassola (VI), Italy. JOBY is a registered trademark of Videndum Media Solutions Spa.

Joby SeaPal 6" Dome Specifications