Jocel JC321NFB - Page 9

5
Key
A.SET: gear seng key
Display screen
1 Gear 1
2 Gear 2
3 Gear 3
4 Gear 4
5 Gear 5
Display
For the rst power-on, the display screen (including the key light) will be displayed in full for 3s,
and then the gear in the middle displays the state of running
Display of normal running
On the occurrence of a failure, the corresponding LED light will give a combined display of failure
code
(loop display);
Where there is no failure, the LED light will display the current running gear of the refrigerator.
Gear setting
The gear will be changed once every me when you press the key SET. Then, the refrigerator will
run under the seng value aer 15s.
Fast cool function
Enter: Circulang modulaon rapid cooling mode
Operate: Indicator of rapid cooling lights up, and the refrigerator operates at 2 .
E
xit: 1. Operate 150min under the rapid cooling mode
2. Temperature adjustment can exit from the rapid cooling mode
 Temperature control of freezing chamber
The freezing temperature is rela low in “COLDER” posion, while the freezing temperature
is rela high in “COLD” posion, thus, “NORMAL” posion is generally used.
When ambient temperature is high in summer, the temperature shall be in the range from
“NOR
MAL” to “COLD”. If the ambient temperature is above 35 , then “COLD” posion shall
Gear 1
Gear 2
Gear 3
Gear 4
Gear 5